Whirlpool CCW5264EW0 - Manual (Page 11)

O P E R A T I N G Y O U R W A S H E R
Soak Cycle
The Soak cycle features brief periods of
agitation and soak time. Use this 30-minute
cycle to remove heavy soils and stains that
need pretreatment.
NOTE: During the agitation and soak time,
the wash Cycle Status Light will be on.
• Use warm water when soaking laundry.
(Hot water can set stains.) See pages
20-22 for stain removal information.
• Use the amount of detergent or presoak
additive recommended by manufacturer.
• The Soak cycle should always be followed
by a wash cycle.
• When soaking with color safe bleach, you
may extend the Soak cycle for up to
2 hours by lifting the lid.
• When using liquid chlorine bleach, never
extend the Soak cycle. Prolonged soaking
with liquid chlorine bleach may damage
clothes.
• When soaking with detergent alone, soak
for at least 5 minutes.
• Always follow Soak cycle with a regular
wash cycle.
Using Spin Only
The Spin Only cycle helps shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Turn the Cycle Selector Knob to Spin
Only, as illustrated.
2. Push the Start/Pause button. The washer
drains for 4-5 minutes and then proceeds
to spin.
11