Caution – Cadillac 2004 XLR User Manual
Page 124
Engaging ACC With the Set Button
{
CAUTION:
If you leave your Adaptive Cruise Control
switch on when you are not using cruise, you
might hit a button and go into cruise when you
do not want to. You could be startled and even
lose control. Keep the Adaptive Cruise Control
switch off until you want to use cruise control.
{
CAUTION:
If you operate ACC without your Head-up
Display (HUD) on and properly adjusted,
your ACC settings will not be visible. You
could forget your settings and be startled by
ACC response and even lose control. Keep
your HUD on and properly adjusted when
using ACC.
ACC set speed is selected by the driver. This is the
speed you will travel if there is no vehicle detected in
your path.
To set ACC, do the following:
1. Make sure the Head-Up Display (HUD) is on and
properly adjusted. See
page 3-29 for more information.
2. Move the ACC switch to on.
3. Get up to the speed you want
4. Press in the set button at the end of the lever and
release it.
5. Take your foot off the accelerator pedal.
3-14