beautypg.com

Service station procedures – Acura 2004 RSX - Owner's Manual User Manual

Page 127

background image

Pull the support rod out of its clip,
and insert the end into the hole on
the left side of the hood.

Lift it up slightly to remove the
support rod from the hole. Put the
support rod back into its holding clip.
Lower the hood to about a foot (30
cm) above the fender, then let it
drop. Make sure it is securely
latched.

If the hood latch handle moves stiffly,
or if you can open the hood without
lifting the handle, the mechanism
should be cleaned and lubricated
(see page

).

3.

173

To Close the Hood

Bef ore Driving

Service Station Procedures

124

SUPPORT ROD

Main Menu

Table of Contents