Acura 2011 ZDX - Advanced Technology Guide - Manual (Page 8)

C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
Some examples on how to program vehicle settings.
1. Turn the vehicle on.
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS, TREBLE, etc.).
3. Set your preferred climate
control settings (fan speed,
temperature, etc.).
4. Once you turn the car off,
your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the ignition switch to
ON (II). Shift into Park (P).
3. Press and hold the SET button
until you hear a beep, then
release.
2. Adjust your preferred seat,
steering wheel, and outside
mirror settings.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
* See Customized Settings in your owner’s manual for other programmable settings.
R E A R V I E W C A M E R A
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
When you shift into
Reverse, a real-time
image of the area behind
your vehicle, along with
helpful parking guide
lines, shows in the
monitor. It automatically
turns off when you shift
out of Reverse.
H o w I t W o r k s
Press and hold the power
button for about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( B a s e M o d e l )
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
Press and release the power
button.
T u r n i n g t h e R e a r v i e w
M o n i t o r O n o r O f f
Press and hold CANCEL for
about 3 seconds.
Adjusting the View Mode (Tech/Advance Package)
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
S w i t c h i n g V i e w s
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle.
Base Model Tech/Advance Base Model Tech/Advance
There are 3 rearview modes.
Press ENTER to toggle between
views. Turn the Interface Dial to
adjust the screen brightness.
Normal Top Down
Wide
Normal Top Down
Wide
13 12
11 ZDX ATG:ATG_NEW STYLE 8/5/2010 4:28 PM Page 8