Panasonic Universal FM Modulator Controller 800EUC - Manual (Page 5)

Display Control Unit Operation
■ Names of Controls and Functions
The following description is based on the assumption
that this unit is connected to the optional CD changer
CX-DP801EUC, etc.
O Reset Button
O Disc Change Button
O Track/Search Up Button
O Repeat/Random Button
0 Power Button
0 Track/Search Down Button
To reset this unit
Use this unit for the first time, press the reset but­
ton when the ignition is on.
Note:
• Press the reset button if you removed display con­
trol unit and installed it again.
• Press the reset button when this unit does not work
properly.
« Press the reset button to return intialization.
To press the reset button, use the slender and strong
stick.
Setting Transmitting Frequency
1. Switch on the power of your car FM radio.
2. Press PWR to switch on the power of display control
unit.
3. Press and hold PWR again for more than 2 seconds.
Then, display changes to transmitting frequency.
4. Press ►► to change and select the frequency,
then press PWR to set.
Set frequency away from public FM stations, {away
more than ±0.4 MHz)
Note:
When you make sure the transmitting frequency,
press and hold PWR for more than 2 seconds. And
press PWR again to return.
■ Operating Procedures
1 To operate your car FM (stereo) radio
Switch on your car FM (stereo) radio.
2 Make sure the CD in the CD changer
3 To start disc play: PWR Button
• Press PWR on display control unit.
• Set the radio as your selected frequency of display control unit.
Note:
When you make sure the transmitting frequency, press and hold PWR for more than 2 seconds. And press PWR
again to return.
4 To stop CD play (to switch to FM tuner): PWR Button
Press PWR again to stop the CD playing. To listen a CD again, press PWR.
5 To select the disc : DISC Button
Press DISC sequentially advance to the next disc while disc plays.