Leica Geosystems TPS110C - Manual (Page 43)

Menu 43
Settings, continued
All parameter section fields are
available to the user.
1. Position focus on
desired choice field.
2. Select setting.
3. Confirm setting: The
focus positions on the
next choice field.
[OK] 4. Leaves the display.
Back to measuring mode.
System Settings
Beep
The beep is an acoustic signal
after each key stroke.
Off Beep switched off
Normal Beep switched on
Loud Increased volume
Sector Beep
Off Sector beep switched off.
On Sector beep sounds at
right angles (0°, 90°,
180°, 270° or 0, 100, 200,
300 gon)
Example Sector Beep:
From 95.0 to 99.5 gon (or from
105.0 to 100.5 gon) a "Fast
beep" sounds whilst from 99.5
to 99.995 gon (or from 100.5 to
100.005 gon) a "Permanent
beep" sounds.