CANOGA PERKINS N525 Ethernet Termination Service Unit - Manual (Page 63)

N525 Ethernet Termination Service Unit 3-45
3. At the Functional Configuration Menu, type the number for an item and press .
Pressing cycles through the options. Press to highlight the select Local or
Remote columns. Press to select an option.
a. User Port Setting
Sets data rate and duplex option on the User Port. After typing [ 1 ] , pressing
cycles through the Data Speed and Duplex options. Options are Interface
Module dependant.
b. Ext Port Setting
Sets data rate and duplex option on the User Port. After typing [ 1 ] , pressing
cycles through the Data Speed and Duplex options. Options are Interface
Module dependant.
c. RMTF
Enables or Disables Remote Fault Forwarding (RMTF) when SBMC is enabled.
Enables or Disables Remote Fault Forwarding and Link Loss Echo (RMTF/LLE)
when SBMC disabled. Pressing cycles through the options. Options are
Disabled, Ext Port Enabled.
d. Link Loss Fwd
Enables or Disables Link Loss Forwarding (LLF). Pressing cycles through
the options. Options are Disabled, User – Ext, Ext – User, and Both Directions.
e. Flow Control
Enables or Disables flow control on the Remote port. Pressing cycles
through the options. Options are Disabled, Ext Port Enabled.
f. Maximum Frame Size: Sets maximum allowable Ethernet Frame size the N525 will
forward. Size range is 1518-10000.
g. Sideband Management
Enables or disables SideBand Management Channel (SMBC) communications with
a remote N525, L351 or L357. When enabled, pressing L verifications SMBC
connectivity with the remote unit.
h. Remote Configuration
Displays Functional Configuration of SBMC connected remote N525, L351 or L357.
4. To return to the Main Menu, press .