Co py – Canon XHA1S User Manual

Page 87

Exter

al Connections

Converting Analog Signals into Digital Signals
(Analog-Digital Converter)

Using the camcorder you can convert analog video input signals to a digital video signal (SD standard)
and output it through the HDV/DV terminal.

Open the menu and select [SIGNAL SETUP]. Select [AV DV], set it to [ON] and close the
menu.

Depending on the signal sent from the connected device, the conversion from analog to digital

signals might not work properly (e.g., signals that include copyright protection signals or
anomalous signals such as ghost signals).

For normal use, set [AV DV] to [OFF]. If it is set to [ON], digital signals cannot be input via the

camcorder’s HDV/DV terminal.

Depending on the software and the specifications of your computer, you may not be able to

transfer converted signals via the HDV/DV terminal.

We recommend powering the camcorder from a household power outlet.
You can also press the AV DV button on the wireless controller. Pressing the button will toggle

the AV

DV conversion on and off.

(

27)

SIGNAL SETUP

DV••••••••OFF

This manual is related to the following products:

XHG1S