Chemtronics CircuitWorks The Mighty Pen CW3700 - Manual (Page 2)

Material
Compatibility
ABS Poor
Buna-N Good
EPDM Not Recommended
Graphite Excellent
HDPE Excellent
PVDF Excellent
LDPE Good
Lexan

Fair
Neoprene Fair
Noryl

Excellent
Nylon
 66
Excellent
Polycarbonate Fair
Polypropylene Good
Polystyrene Not Recommended
PVC Poor
Silicone Rubber Poor
Teflon

Excellent
Viton

Poor
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
1. Hold pen vertically and briefly depress tip to
start liquid flow.
2. Allow liquid to sit on the substance being
removed for 15 - 20 seconds, then rub area with
pen tip until substance is removed. Wipe area
clean with a Controlwipes
TM
Wipe.
3. Wipe tip on a Controlwipes
TM
Wipe to remove
any buildup.
AVAILABILITY
CW3700 11g (0.39 oz.) Pen
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics
, The Mighty Pen and CircuitWorks are
registered trademarks of Chemtronics. All rights reserved.
ControlWipes
 is a trademark of Chemtronics. All rights
reserved. All other trademarks herein are trademarks or
registered trademarks of their respective owners
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
DISTRIBUTED BY: