Changing the color and shooting, P. 92), Color accent – Canon IXUS 1000 HS User Manual
Page 92
92
You can change the look of an image when shooting. However, depending on
shooting conditions the image may become coarse, or the colors may not
come out as expected.
Color Accent
You can choose to retain a single color and change the rest to black and white
in a composition.
Choose
T.
●
to choose
T.
Press the
n button for more
than one second.
The unchanged image and the Color
Accent image will alternately display.
●
The color for default settings is green.
Specify the color.
●
Position the center frame so it is filled with
the color you want and press the
q button.
The specified color will be recorded.
Specify the range of colors.
●
Press the
op buttons or turn the  dial
to change the range of colors to be
retained.
●
Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
●
Pressing the
n button accepts the
setting and restores the shooting screen.
Changing the Color and Shooting
Recorded color
Using the flash may cause unexpected results in this mode.