Changing the metering method, Choose the metering method, Choose an option – Canon IXUS 1000 HS User Manual
Page 87
Changing the Metering Method
87
You can change the metering method (brightness measuring function) to
match the shooting conditions.
Choose the metering method.
●
After pressing the
m button, press the
op buttons or turn the  dial to choose
, then press the
m button again.
Choose an option.
●
Press the
op buttons or turn the  dial
to choose an option, then press the
m
button.
The setting will appear on the screen.
•
The camera may not be able to focus in some conditions.
•
In low light conditions, AF frames may not turn blue even after pressing
the shutter button halfway. In this case, you can set the focus and
exposure with the AF frame setting.
•
If a correct exposure cannot be obtained, the shutter speed and aperture
value appear in orange. Release your finger from the shutter button, then
press it again halfway.
•
You cannot shoot with the AF lock in this mode.
•
The [AF-Point Zoom] option in the
4 tab is not available in Servo AF
mode.
•
Not available when using Self-Timer
,
,
Changing the Metering Method
Evaluative
Suitable for standard shooting conditions, including back lit shots.
Automatically adjusts the exposure to match the shooting
conditions.
Center
Weighted Avg.
Averages the light metered from the entire frame, but gives greater
weight to the center.
Spot
Only meters within the
(Spot AE Point frame) that appears at
the center of the screen.