Using the face self-timer, Choose, Press the shutter button fully – Canon IXUS 1000 HS User Manual
Page 66
Using the Face Self-Timer
66
The shutter will release approximately two seconds after the camera detects
a new face
. You can use this when the photographer wants to be in
the image, such as a group photo.
Choose .
●
to choose
,
then press the
n button for more than
one second.
●
Press the
qr buttons or turn the  dial to
choose
, then press the
n button.
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
Changing the number of shots
After choosing
in Step 1, press the
op buttons.
•
Shutting both eyes will also be detected as a wink.
•
If a wink is not detected, the shutter will release approximately
15 seconds later.
•
If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer