Using an eye-fi card – Canon IXUS 1000 HS User Manual
Page 155
155
Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is
authorized in the country or territory of use
When you put a prepared Eye-Fi card into the camera, you can automatically
transfer your images wirelessly to a computer, or upload them to a web
service.
Image transfer is a function of the Eye-Fi card. For details on how to setup
and use the card, and concerning problems transferring images, please refer
to the Eye-Fi card user guide, or contact the manufacturer.
If you put an Eye-Fi card into the camera, the connection status can be
checked in the shooting screen (Information Display) and playback screen
(Simple Information Display).
will appear on transferred images.
Using an Eye-Fi Card
Please keep the following things in mind when using an Eye-Fi card.
(Gray)
Not connected
(Flashing white) Connecting
(White)
Transfer standby
(Animated)
Transferring
Interrupted
Error retrieving Eye-Fi card info (Turn the camera off and on again.
If this continues to appear, there may be a problem with the card.)
The power saving function does not work while transferring images
.
•
Even if you set [Eye-Fi trans.] to [Disable]
, the Eye-Fi card may
transmit radio waves. Be sure to remove the Eye-Fi card from the camera
before entering areas that prevent unauthorized transmission of radio waves,
such as hospitals and airplanes.
•
If you have trouble transferring images, check the card or computer settings.
For details, refer to the user guide supplied with the card.
•
Depending on the connection status of the wireless network, it may take time
to transfer images, or image transfer may be interrupted.
•
Due to its transfer function, the Eye-Fi card may become hot.
•
Battery consumption will be quicker than in normal use.
•
Camera operations will be slower than in normal use. This may be resolved
by setting [Eye-Fi trans.] to [Disable].