beautypg.com

Installing wyse® for windows embedded, Installing wyse, For windows embedded – Welch Allyn Virtual Channel Client Software - Installation Guide User Manual

Page 7

background image

Welch Allyn VCC software

Network configuration

5

Installing WYSE

®

for Windows Embedded

To install the Welch Allyn Virtual Channel Client (VCC) on a WYSE thin terminal, complete
the following steps:

1.

Press and hold the Shift key while logging off.

2.

Log on as an Administrator.

3.

Disable the Write filter.

The system reboots.

4.

Return to Administrator mode by repeating steps

1

and

2

.

5.

Install VCC as described in

“Installing VCC software”

on page 3.

6.

Connect the device to the system using a shielded USB cable.

7.

Enable the Write filter.

The system reboots and the device is ready to use in a thin-client environment.

Note

If a device is not available, you can skip this step.

See also other documents in the category Welch Allyn Equipment: