Jeep 2013 Grand Cherokee - Owner Manual - Manual (Page 398)

Controls
The headphone power indicator and controls are located
on the right ear cup.
NOTE: The rear video system must be turned on before
sound can be heard from the headphones. To conserve
battery life, the headphones will automatically turn off
approximately three minutes after the rear video system
is turned off.
Changing the Audio Mode for Headphones
1. Ensure the Remote Control channel/screen selector
switch is in the same position as the headphone selector
switch.
NOTE:
• When both switches are on Channel 1, the Remote is
controlling Channel 1 and the headphones are tuned to
the audio of the VES™ Channel 1.
• When both switches are on Channel 2, the Remote is
controlling Channel 2 and the headphones are tuned to
the audio of the VES™ Channel 2.
2. Press the MODE/SOURCE button on the remote
control.
3. If the video screen is displaying a video source (such as
a DVD Video), pressing DISPLAY shows the status on a
popup banner at the bottom of the screen. Pressing the
MODE/SOURCE button will advance to the next mode.
When the mode is in an audio only source (such as FM),
the Mode Selection menu appears on screen.
4. When the Mode Selection menu appears on screen,
use the cursor buttons on the remote control to navi-
gate to the available modes and press the OK button to
select the new mode.
5. To cancel out of the Mode Selection menu, press the
BACK button on the remote control.
396 UNDERSTANDING YOUR INSTRUMENT PANEL