Jeep 2008 Grand Cherokee SRT - Manual (Page 252)

When in the Autostick mode, as the engine RPM nears
the engine maximum speed, an “UPSHIFT” message will
appear in the Electronic Vehicle Information Center
(EVIC) portion of your instrument cluster. This message
appears in order to alert the driver that the engine speed
is approaching it’s maximum value and a upshift to the
next gear is required. In the event that the driver does not
upshift, the engine control system will automatically do it
for the driver. Refer to “Electronic Vehicle Information
Center” in Section 4 of this manual.
Shifting into or out of the Autostick mode can be done at
any time without taking your foot off the accelerator
pedal. When the driver wishes to engage Autostick,
simply move the shift lever to the Left or Right (D-/D+)
position while in D (Drive).
Hold the shift lever to the right for at least one second to
disengage Autostick. The transmission will now operate
automatically; shifting between the five available gears.
Autostick General Information
• You can start out in first or second gear. The system
will ignore attempts to upshift at too low of a vehicle
speed.
• The transmission will automatically downshift to first
gear when coming to a stop.
• Starting out in second gear is helpful in snowy or icy
conditions.
• Avoid using speed control when Autostick is engaged.
• The transmission will automatically shift up when
maximum engine speed is reached while Autostick is
engaged.
• Transmission shifting will be more noticeable when
Autostick is engaged.
252 STARTING AND OPERATING