Elecraft KX3 Guide for Blind Operators - Manual (Page 7)

NUMERIC KEYPAD
12 of the knobs and switches have secondary use as a numeric keypad. The keypad is used for
direct frequency entry, message record/play, and certain menu operations.
Keypad switches and knobs include the following:
ENTER (MSG)
DECIMAL POINT (ATU TUNE)
0 (XMIT)
1 (PRE)
2 (ATTN)
3 (APF)
4 (SPOT)
5 (CMP)
6 (DLY)
7 (AF/RF-SQL knob)
8 (PBT I/II knob)
9 (KEYER/MIC knob)
There are usage examples in the ownerʼs manual.
MEMORIES
[to be described]
MENU ACCESS [CW UI NOT YET IMPLEMENTED]
If you hold the DISP/MENU switch, the menu comes up. The OFS/B knob now scrolls through the
menu entries. Planned: If CW feedback is enabled, menu entries and their current parameter
values will be sent in Morse. If you rotate the OFS/B knob quickly, the menu read-out will be
truncated as required. This allows you to quickly converge on the desired menu entry (they are in
alphanumeric order). A full listing of menu functions can be found in the manual.
Once a menu entry is selected, rotating VFO A will read out the parameter values as they are
changed.