CASO Germany VC 300 Vacuum System - Manual (Page 34)

caso VC300 Pro 34
Please note
► Defective components must always be replaced with original replacement parts. Only
such parts will guarantee that the safety requirements are fulfilled.
► Do not leave the device unsupervised when it is in operation.
► When disconnect, please unplug by grasp the plug and not the cord, to avoid any
injury.
► Do not immerse in water or any other liquids.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.
14.3 Sources of danger
14.3.1 Danger of burns
Warning
Please observe the following safety notices in order not to burn or scald yourself or
others.
► To avoid getting burned, never touch the sealing bar while the unit is operating.
14.3.2 Danger of fire
Warning
There is a danger of fire due to the event the device is not used properly.
Observe the following safety notices to avoid dangers of fire:
► Do not set up the device near flammable material.
► Keep this appliance away from sources of heat (gas, electric, burner, heated oven).
14.3.3 Dangers due to electrical power
Danger
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies!
Observe the following safety notices to avoid dangers due to electrical power:
► If the connection lead is damaged, you will need to have a special connection lead
installed by an authorized electrician.
► Do not operate this device if its power cable or plug is damaged, if it does not work
properly or if it is damaged or has been dropped. If the power cable is damaged, it will
need to be replaced by the manufacturer or his service agency or a similar qualified
person, to avoid any dangers.
► Do not open the housing on the device under any circumstances. There is a danger of
an electrical shock if live connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device can also occur.