Fully-automatic flash operation – Canon 220EX User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Make sure that the pilot
lamp is lit.

Aim the active focusing

point on the subject and
press the shutter button
halfway.

• Focus is achieved and the shut

ter speed and aperture settings
are displayed in the viewfinder
and on the LCD panel.

• The sync speed is set automati

cally anywhere from 1/60 sec up
to the camera maximum sync
speed and the aperture is set
automatically at the same time.
The

camera

maximum

sync

speed will vary depending on the
camera model. (See page 40.)

Fully-Automatic Flash Operation

B O

4.0

1 •

Check that the ^ , shutter
speed, and aperture set

tings are displayed in the

viewfinder. Then, press the
shutter button completely

to take the picture.