O o (^o, Onrl – Canon 220EX User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Flash with Other Modes

When you want to control the

shutter speed to create a special
effect, use shutter speed-priority

AE. Set the desired sync speed

anywhere from 30 sec. up to the

camera maximum sync speed.

The camera sets the aperture

automatically to suit the back

ground light level. The E-TTL
autoflash control system regu

lates the flash output according

to the shutter speed you set for

optimum flash exposure.

Set the camera to Tv
(Shutter

speed-priority

AE) and set the desired
sync

speed

anywhere

from 30 sec. up to the
camera

maximum

sync

speed.

The aperture value blinks in the viewfinder to alert you of a possible over-

^ exposed or underexposed background. Change the sync speed until the

aperture value stops blinking and remains displayed.

[(□e-Tfi iMCzi

PILOT

Onrl

o o (^o

Make sure that the pilot
lamp is lit.

Press the shutter button
halfway to focus on the

subject.

t 90

Check that ^ is displayed

in the viewfinder and make

sure

that

the

aperture

value is not blinking in the
viewfinder. Then, press the
shutter button completely

to take the picture.