Sony KV-32XBR45 - Manual (Page 37)

Notes
• If more tKan one code number is listed, try entering them one
by one, until you come to the correct code for your equipment.
• In some rare cases, you may not be able to operate your non-
Sony video equipment with this remote control. This is because
your equipment may use a code that is not provided with this
remote control. In this case, please use the equipment's own
remote control unit.
• The code numbers for Sony equipment are assigned at the
factory as follows:
Beta, ED Beta VCR 01
8 mm VCR
02
VHS VCR 03
Caution
When you remove the battery from the remote control, the code
may revert to the factory setting. Reset the code each time you
replace tlieJjatter.y, if necessary.
Operating video equipment
VTR
Middle position
Video operating
buttons
1
Set the VTR 1-2-3 selector according to the
video equipment you want to operate.
Use the video operating buttons on the
remote control to operate the video
equipment.
Operating a VCR Buttons on the remote
control
To turn on or off Press POWER
To change channels Press CH +!-
To record Press # and REC
simultaneously
To play
Press ►
To stop
Press ■
To fast forward
Press ► ►
To rewind the tape
Press
To pause
Press II
To resume normal playback,
press again
To search the picture
forward and backward Press ► ► or during
playback
To resume normal playback,
release the button.
Operating a multi-disc
player Buttons on the remote
control
To play Press ►
To stop Press ■
To pause Press II
To resume normal playback,
press again.
To search the picture
forward and backward Keep pressing ► ► or ◄ ◄
during playback
To resume normal playback,
release the button.
To search the chapter Press CH +!-
Note
• If the video equipment does not have a certain function, the
corresponding button on this remote control will not operate.
Operations 37