Tri-Tronics Bark Limiter – OLD - Manual (Page 7)

OPTIONAL COMPONENTS
The following components are not included with the
Bark Limiter. Call Tri-Tronics at 1-800-456-4343
for the dealer nearest you.
Bark Limiter Tester. This buzzer activates the vibration
sensor and causes the collar to produce stimulation.
It is used with a 9-volt battery, purchased separately.
Dummy Collar. This collar has the same weight,
feel, and appearance as the Bark Limiter, but has
no electronics.
Collar Strap. The Bark Limiter collar strap is user-
replaceable. You do not need to send the unit back
to us. By using the allen wrench supplied with the
replacement collar strap, you unscrew the torn or
worn collar strap and replace it with the new one.
Storage Pouch. This vinyl pouch may be used to carry
contact points and the contact point wrench.
Higher Intensity Contact Points. Two higher intensity
contact points are available. They are yellow (# 4) and
green (# 5). Most dogs do not need these higher levels
to prevent barking if they are properly introduced to
the Bark Limiter.
Position the battery end against the sensor,
not the speaker end.
Page 5 Bark Limiter