Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 214)

MIB Navigator
200 CSX400 and CSX400-DC User’s Guide
reset:
Syntax: reset
Description: The reset command allows you to perform a soft reset of the device. The
user is queried to confirm the reset command to insure against unwanted
resets.
Note: The MIB Navigator’s connection to the device is terminated upon
execution of this command.
Options: Not Applicable
route:
Syntax: route add
route add
route delete
Description: Allows you to add or delete static entries in the IP Forwarding Table for
the device. The first address is the destination. The second address is the
next hop for the given interface. The metric value is optional. If included,
it is used to set the value of ipForwardingMetric1. When RIP is used,
the metric specifies the distance in hops to the destination.
secondIP:
Syntax: secondIP add
secondIP delete
Description: Allows you to add or delete secondary IP addresses on the interface.
Options: Not Applicable