beautypg.com

How to engage the automatic locking mode, How to disengage the automatic locking mode, Automatic locking retractor mode (alr) — if – Dodge 2013 Challenger_SRT - Owner Manual User Manual

Page 57: Equipped

background image

to retract completely in this case and then carefully pull

out only the amount of webbing necessary to comfort-

ably wrap around the occupant’s mid-section. Slide the

latch plate into the buckle until you hear a Љclick.Љ

Automatic Locking Retractor Mode (ALR) — If
Equipped

In this mode, the shoulder belt is automatically pre-

locked. The belt will still retract to remove any slack in

the shoulder belt. The Automatic Locking Mode is avail-

able on all passenger-seating positions with a combina-

tion lap/shoulder belt. Use the Automatic Locking Mode

anytime a child safety seat is installed in a seating

position that has a belt with this feature. Children 12

years old and under should always be properly re-

strained in the rear seat.

How To Engage The Automatic Locking Mode

1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until

the entire belt is extracted.

3. Allow the belt to retract. As the belt retracts, you will

hear a clicking sound. This indicates the safety belt is

now in the Automatic Locking Mode.

How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it

to retract completely to disengage the Automatic Locking

Mode and activate the vehicle sensitive (emergency)

locking mode.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55