Canon elura20 - Manual (Page 95)

95
E
Using a Memory Card (ELURA20 MC only)
Selecting the recording image quality
Select the quality of a still image to be recorded.
QUALITY•••••FINE CARD SET UP
( 35)
Make sure the POWER dial lock lever is switched to the 2 22 position. Open
the menu and select CARD SET UP. Then select QUALITY, set it to
STANDARD and close the menu.
CARD
R E C
VCR
Inserting and removing the memory card
1. Turn the POWER dial to OFF.
2. Slide the memory card compartment cover in the direction of the
arrow and open.
3. Insert straight or remove the memory card.
• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring out.
4. Close the cover.
• When you set the POWER dial to CARD PLAY, the last image recorded
appears. If there are no images recorded on the memory card, NO IMAGES
appears in the display.
• Do not touch the memory card terminals.
Do not attempt to pull the memory card out without first pushing it in.