Canon elura20 - Manual (Page 94)

94
E
Using a Memory Card
(ELURA20 MC only)
The camera can take, store and manage still images on 2 types of memory cards:
the SD (Secure Digital) Memory Card (supplied with the camera) or a
MultiMediaCard (commercially available). The SD Memory Card has the protect
switch to protect your recording from accidental erasure. The SD Memory Card
and the MultiMediaCard fit into the same slot.
You can do the following with a memory
card:
• Record still images (
98)
• View still images 3 ways: Single
( 102), Slide show ( 103),
Index screen ( 103)
• Select the quality of images recorded on
the card ( 95)
• Protect important images against accidental erasure ( 107)
• Print mark ( 108) and erase ( 110) still images
• Create interesting effects by combining images ( 112)
• Record a still image from a cassette ( 100)
• Copy multiple still images automatically to and from a cassette ( 115, 116)
You can use most of the camera’s functions when recording to a memory card,
such as the various recording programs (
53), self-timer ( 67), shutter speed
( 70), white balance ( 73) and other manual adjustments. Available functions
are marked with a or icon.
2 While the camera is recording the still image,
appears red* in the
display.
• While
appears red in the display, do not remove the memory card or
disconnect the power source. Doing so could result in data damage.
2 While the camera is retrieving a still image,
appears green* in the
display.
• While
appears green in the display, do not remove the memory card.
Doing so could result in data damage.
* It appears white when in mirror mode and on the screen of a connected TV.
2 If you use memory cards other than the supplied one, make sure to format
them with the camera.
<<<<
<<<<
>>>>
>>>>
CARD
PLAY CARD
R E C
Memory Card Introduction -ELURA20 MC only-
Protect
Switch
Front
SD Memory Card SDC-8M
Back
Important
• Inserting or removing the memory card without first setting the POWER dial
to OFF can result in data damage.
• This camera uses only SD Memory Cards( **) or MultiMediaCards. You
cannot use any other types of memory cards.
** logo is a trademark.
Terminals