Canon elura20 - Manual (Page 13)

13
E
Mastering the Basics
• The adapter can charge a single battery pack from either side, A or B. If you
attach two battery packs, charging begins from the battery you first attach to the
adapter, or, if the batteries are already attached to the adapter when you plug it
into an AC outlet, from the side labeled “A”.
• When powering your camcorder from an AC outlet, you do not need to remove
battery packs attached to the adapter, but charging will not take place until you
remove the DC coupler from the adapter.
• Do not connect the power adapter to an unspecified product.
• You can find detailed notes for using the batteries in the “Notes on Using the
Batteries” ( 122). These notes include charging and recording times and how
to install the backup battery.
Specifications
Power supply 100–240 V AC, 50/60 Hz
Power consumption 40 W
Rated output Adapter mode : 7.2 V, 2.0 A DC
Charger mode : 8.4 V, 1.0/2.5 A DC
Operating temperature range 32°F–104°F (0°C – 40°C)
Dimensions 3
Ч 4
3 /
4
Ч 2
1 /
8
in (75
Ч 120 Ч 53 mm)
Weight 8 7 /
8
oz (250 g) (without power cable)
Weight and dimensions are approximate.
Errors and omissions excepted.
Subject to change without notice.
CA-400 Compact Power Adapter
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it with the same
type number CA-400 or equivalent.
The Adapter can be used with a power supply between 100 and 240 V AC. For
areas where 120 V AC power is not used, you will need a special plug adapter.
Contact your nearest Canon Service Center for further information.