Diode LED DMX WiFi Wall Mount User Manual
Page 3
1.877.817.6028
www.DiodeLED.com
www.DiodeLED.com
INSTALLATION GUIDE
3 OF 5
DMX WIFI WALL MOUNT ZONE LED CONTROLLER
®
Pinout Connection Guide
Dynamic Mode Chart
Setting the DMX Address
IG061814-1.2
Each DMX decoder or DMX fixture needs to be addressed correctly so the controller can
distinguish between each decoder. To pair a DMX decoder or fixture to a specific zone of
the controller (1-4), set each decoder/fixture to one of the following addresses:
• Zone 1: Set to address ‘001’ (will be fixed to address 001 – 004)
• Zone 2: Set to address ‘005’ (will be fixed to address 005 – 008)
• Zone 3: Set to address ‘009’ (will be fixed to address 009 – 012)
• Zone 4: Set to address ‘013’ (will be fixed to address 013 – 016)
Each zone of the controller is fixed with 4 DMX addresses to control the 4 channels:
CH1 – Red, CH2 – Green, CH3 – Blue, CH4 – White or X.
Example of DMX Addressing Display
Digital Display
The following diagrams/tables indicate the appropriate connections for patching your own CAT5/RJ45, and XLR-3 splice cables. These diagrams are
for general reference and may slightly differ between different cable manufacturers.
1 2 3 4 5 6 7 8
RJ45 568B Pinout Table
Pin No. Wire Color
Function
1
White/Orange Data +
2
Orange
Data -
3
White/Green None
4
Blue
None
5
White/Blue
None
6
Green
None
7
White/Brown May be used as 2nd ground
8
Brown
Ground
XLR-3 Pinout Table
Pin No. Function
1
Ground
2
Data -
3
Data +
Mode Description
1
Full Color Fade #1
2
Reverse Rainbow Fade
3
Random Full Color Fade
4
7 Color Jump
5
RGB Fade In / Fade Out
6
RGB Fade In to Off
7
RGB On to Fade Out
8
RGB Jump
9
Full Color Fade #2
10
Pastel Color Fade In / Fade Out
The Dynamic Mode tool plays factory-programmed
scenes. Choose up to 10 different scenes. Short
press switches/pauses the mode. Long press
adjusts speed of the dynamic mode.