Bonide Grass Beater - Manual (Page 9)

Additives
To achieve consistent weed control, always
use one of the following additives: Dash HC,
Sundance HC, methylated/modified seed oil, or
crop oil concentrate. In addition, urea ammonium
nitrate or ammonium sulfate is recommended
for use on alfalfa, beans, cotton, flax, peanuts,
peas, potatoes, soybeans, field corn, sweet corn,
sugar beets, and sunflowers to enhance activity
on certain grass species. See Table 4. Additive
Rates Per 1000 sq. ft. for more information.
However, when used in many vegetable crops
under the following conditions, this product plus
adjuvants should be used with caution due to
potential crop leaf injury: when the temperature
exceeds 90° F and the relative humidity is 60% or
greater, or anytime the temperature exceeds 100°
F, regardless of the humidity.
Because most nitrogen solutions are mildly
corrosive to galvanized, mild steel, and brass
spray equipment, rinse the entire spray system
with water soon after use. UAN and AMS are not
registered in California.
Consult a Bonide representative or local
agricultural authority for more information on the
use of additives.
Dash HC, Sundance HC, Crop Oil Concentrate,
or Methylated Seed Oils
A crop oil concentrate must contain either a
petroleum or vegetable oil base and must meet all
of the following criteria:
• Non-phytotoxic
• Contain only EPA-exempt ingredients
• Provide good mixing quality in the jar test
• Successful in local experience