Rockwell Automation 6000 Mini-Sized Sensors, Mounting Assemblies - Manual

Installation Instructions PHOTOSWITCHr Mounting Assemblies
For Series 6000 Mini-Sized Sensors
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Single Hole Mounting Assembly #60--2006
A right angle mounting bracket with a 25.4mm (1in) nominal
hole in which the Series 6000 sensor is inserted and secured
with the #129--106--1 Mounting Kit supplied with the control.
Dimensions—mm (inches)
Tilt Mounting Assembly #60--2007
A stainless steel right angle mounting bracket and hardware
to provide angular tilt adjustment.
12.7
(0.50)
31.8
(1.25)
8.6
(0.340)
63.5
(2.50)
7.9
(0.31)
47.8
(1.88)
5.6
(0.219)
14 Gage
Cold Rolled
Steel
(Painted)
Clearance for
#10-32 Hdw (M5)
(2 Slots)
49.3
(1.94)
25.4
(1.00)
26.0 (1.025)
Dia.
90

Single Hole Mounting Assembly #60-2006—mm (inches)
15_
15_
31.8 (1.25)
Low Voltage DC
Control Mounting
2.63 (66.8)
4.4
(0.176)
3.8
(1.25)
13.3
(0.525) 30.2
(1.188)
6.4 (0.25)
AC/DC Control Mounting
57.2 (2.25)
Clearance for
#10-32 Hdw
(M5) (3 Slots)
#18 Gage
Stainless Steel
Tilt Mounting Assembly #60-2007
41.3
(1.625)
12.7 (0.50)
13.9
(0.548)
4.4
(0.176)
5.8
(0.23)
3.4
(0.135)
Clearance for #6-32 Hdw (M3) (2 Slots)
90_
#6 Flat
Washer
Mounting Kit #129--106--1
This kit contains 2 plastic nuts, anti-vibration mount, and slip pads.
Installation Instructions for #129-106-1
2
1
3
4
Part Identification:
1
Series 6000 Unit
2 Plastic Nuts (33-450)
3 Vibration Mount (16-153)
4 Slip Pad (89-51)
1--20 UNEF
2A Thread
31.8
(1.25)
Mounting Nuts
3.8
(0.150)
7.6
(0.300)
34.9
(1.375) Dia.