Rockwell Automation 1756-Mx ControlLogix Memory Board Installation Instructions User Manual
Installation instructions, Before you begin, Additional manuals
Publication 1756-IN033B-EN-P - November 2000
Installation Instructions
ControlLogix™ Memory Board
Catalog Number: 1756-M1, -M2, -M3, -M13, -M14, -M16
Before You Begin
Use this document as a guide to install your ControlLogix memory board. The
memory board privides additional memory for your ControlLogix controller. You
can install only one memory board per controller.
Additional Manuals
This product has the following manuals:
•
Logix5000 Controllers Common Procedures Programming Manual,
publication 1756-PM001
•
ControlLogix System User Manual, publication 1756-UM001
If you want to:
•
view or download a manual, visit either of these locations:
– www.ab.com/manuals
– www.theautomationbookstore.com
•
purchase a printed manual, use one of these options:
– contact your local distributor or Rockwell Automation representative
– visit www.theautomationbookstore.com and place an order
– call 800.963.9548 (USA/Canada) or 001.320.725.1574 (outside
USA/Canada)
Tools that You Need
•
#2 phillips screwdriver
•
grounding wriststrap
Document Outline
- 1756-IN033B-EN-P, ControlLogix Memory Board Installation Instructions
- Before You Begin
- Additional Manuals
- Tools that You Need
- Important User Information
- European Communities (EC) Directive Compliance
- What You Need to Do
- Step 1: Verify that You Have All the Components
- Step 2: Remove the Controller from the Chassis
- Step 3: Remove the Side Plate of the Controller
- Step 4: Remove the Existing Memory Board (If Any)
- Step 5: Install the Memory Board
- Step 6: Replace the Side Plate
- Step 7: Attach Labels
- Agency Certifications
- Specifications
- Hazardous Location information
- Back Cover