Rockwell Automation Logix5000 Controllers Produced and Consumed Tags Programming Manual - Manual (Page 7)

Preface
This manual details how, with a Logix5000 controller, to produce and consume
system-shared tags and produce a large array. This manual is one of a set of related
manuals that show common procedures for programming and operating
Logix5000 controllers.
For a complete list of common procedures manuals, refer to the Logix5000
Controllers Common Procedures Programming Manual , publication
1756-PM001 .
The term Logix5000 controller refers to any controller that is based on the
Logix5000 operating system.
The Studio 5000 Automation Engineering & Design Environment™ combines
engineering and design elements into a common environment. The first element is
the Studio 5000 Logix Designer™ application. The Logix Designer application is
the rebranding of RSLogix™ 5000 software and will continue to be the product to
program Logix5000™ controllers for discrete, process, batch, motion, safety, and
drive-based solutions.
The Studio 5000® environment is the foundation for the future of
Rockwell Automation® engineering design tools and capabilities. The Studio 5000
environment is the one place for design engineers to develop all elements of their
control system.
These documents contain additional information concerning related Rockwell
Automation products.
Resource Description
Industrial Automation Wiring and Grounding Guidelines ,
publication 1770-4.1
Provides general guidelines for installing a Rockwell
Automation industrial system.
Studio 5000 environment
Additional resources
Rockwell Automation Publication 1756-PM011F-EN-P - October 2014 7