Rockwell Automation 1492-ASPTC1 Terminal Cover - Manual

1492-RCD
Important Instructions
1. The 1492-ASPTC1 is meant to be inserted ONLY into the
1492-RCD or 1492-SP product families.
3. The 1492-ASPTC1 is not to be removed by hand. Use a flathead
screwdriver to lift up the side of the Terminal Cover until it pops
out of the terminal screw hole.
2. Align the ears of the Terminal Cover with the terminal screw hole
and push down until the Terminal Cover snaps into place.
Terminal Cover
Couvercle de la borna
Klemmenabdeckung
(Cat 1492-ASPTC1)
Copriterminale
Tampa do terminal
Cubierta para terminales
To prevent electrical shock, disconnect from power source before installing or servicing.
Avant le montage et la mise en service, couper l'alimentation secteur pour éviter toutes
décharges.
Vor Installations- oder Servicearbeiten Stromversorgung unterbrechen, um Elektroschocks
zu vermeiden.
Per prevenire infortuni, togliere tensione prima dell'installazione o manutenzione.
Desconéctese de la corriente eléctrica, antes de la instalación o del servicio, a fin de
impedir sacudidas eléctricas.
WARNING
AVERTISSEMENT
WARNUNG
AVVERTENZA
ADVERTENCIA
为防止触电，请在电源完全断开后才进行安装或维修
Printed in U.S.A.
DIR: 10000342159 (Version 00)
Removal
Insertion
See note 3