X-1 (H2O Audio) S8-1A3 - Manual (Page 3)

Important Note:
Only use the lubricant provided.
For more information please read
your manual.
Apply a small amount of the enclosed Silicon Super O-Lube on
the Tray and on the inside of the Silicone Sleeve Seal Area. This
will help maintain a watertight seal, and facilitate the opening
and closing of the housing.
CAUTION: If too many uses occur
between the application of the Super
O-Lube, a watertight seal cannot be
guaranteed. Please apply a small
amount of Super O-Lube at least
every 5 separations of the Tray and
Silicone Sleeve.
If you have any questions or need refills, visit our website or contact
H2O Audio Customer Support
P. 858.623.0339
E. [email protected]
h2oaudio.com
Apply Super O-Lube Here