Walker Edison Furniture V52Y710 52 TV Stand - Manual (Page 2)

Assembly Instructions
V52Y710, V52Y710B
Important: Make sure all parts are available for assembly
Follow instruction steps very carefully
Step 1: Lay glass “H” upside down on a soft surface
Screw rods “F” in all fi ve plates
Place cylinders “B” onto all fi ve rods “F”
Warning: Be careful to not over tighten rods
Step 2: Place rings “D” on all cylinders “B”
Place glass “I” on all cylinders “B”
Place rings “D” on all cylinders “B”
Step 3: Place cylinders “A” on all rods “F”
Place rings “D” on all cylinders “A”
Place glass “I” on all cylinders “A”
Place rings “D” on all rods “F”
Step 4: Screw cylinders “C” in all rods “F”
Place caps “G” on all cylinders “C”
Step 5: Secure Cable Management (J) with Rods and Nuts (K)
Step 6: Turn upright very carefully
**NOTE: Cylinders “A” and “B” are interchangeable allowing you to put the large shelf on either the 1st or 2nd level.
For our most up to date instruction, to request missing, lost, or broken parts, or for any other Customer Service issues,
please visit our website at www.walkeredison.com or call us at 877-207-5906.