beautypg.com

USG Translucents Ceiling Panels User Manual

Page 2

background image

Compatible Cleaners

Harsh solvents such as methyl ethyl ketone (MEK) or muriatic acid can cause surface degradation and crazing.
Additionally, cleaners such as glass cleaners, acetone, benzene, lacquer thinner, and gritty abrasive scouring
compounds should never be used to clean these panels.
Use only the following mild cleaning agents:
– VM&P naphtha
– Brillianize
– JOY

®

– PALMOLIVE

®

Dishwashing Liquid

– Novus (acrylic cleaner)
Follow the manufacturer’s instructions, recommendations and safety procedures when using these products.

Polishing Scratches

Buff and fill scratches and minor abrasions with one of the following mild polishes:
– MEGUIAR’S

®

Mirror Glaze Clear Plastic Detailer

– NOVUS

®

Plastic Polish (No. 1 or No. 2)

– PLEXUS

®

Plastic Cleaner Protectant and Polish

– SC JOHNSON

®

Paste Wax

– JANVIL

®

Plastic Restore and Polish

– 3M

Finesse-It

Test the product selected on a small section of one panel, following the polish manufacturer’s instructions,
to determine its effectiveness for your application.

Limitations

Do not use abrasive or highly alkaline cleaners.

Do not scrape panels with squeegees, razor blades or other sharp instruments.

Do not use benzene, gasoline, acetone, carbon tetrachloride, butyl cellosolve or glass cleaners.

Do not clean panels in extreme sunlight or at elevated temperatures.

Trademarks

The following trademarks

used herein are owned by USG

Interiors or a related company:

D

onn

, T

opo

, T

ranslucenTs

. Freon

is a trademark of E.I. du Pont

de Nemours and Company.

Joy is a trademark of Procter &

Gamble Company. Lexan is a

registered trademark of General

Electric Company.Meguiar’s is a

trademark of Meguiar’s, Inc.

Novus is a trademark of Novus

Plastic Polish, Ltd. Palmolive is a

trademark of Colgate-Palmolive

Company. Plexus is a trademark

of BTI Chemical Co., Inc. SC

Johnson is a trademark of S.C.

Johnson & Son, Inc. Finesse-it

is a trademark of 3M. Janvil

is a registered trademark of

Janvil Inc.

Notice

We shall not be liable for

incidental or consequential

damages, directly or indirectly

sustained, nor for any loss

caused by application of these

goods not in accordance with

current printed instructions or

for other than the intended use.

Our liability is expressly limited

to replacement of defective

goods. Any claim shall be

deemed waived unless made

in writing to us within thirty (30)

days from the date it was or

reasonably should have been

discovered.

Note

All products described here

may not be available in all

geographic markets. Consult

your local sales office or

representative for more

information.

Safety First!

Follow good safety and

industrial hygiene practices

during handling and installation

of all products and systems.

Take necessary precautions and

wear the appropriate personal

protective equipment as

needed. Read material safety

data sheets and related

literature on products before

specification and/or installation.

IC456/rev. 11-08

©2008, USG Interiors, Inc.

Printed in U.S.A.

Manufactured by

United States Gypsum Company

550 West Adams Street

Chicago,

IL 60661

This manual is related to the following products: