NTi Audio Minirator MR-PRO - Manual (Page 8)

8
Buttons and operating elements
wave
sens mute
freq
esc
level
1 2 3 4
5
6 7 8
9
4 Wave Selection of the test signal.
5 Freq Setting the output frequency. Direct jump to
the “PARAM” menu with the “SWEEP” and
“CHIRP” test signals.
6 Mute Switches off the output signal.
Mute is indicated at the lower right corner of
the display and a flashing mute button.
The button lights up continually during the
pauses of the “PNoise” and “Chirp” signal
waveforms.
7 On/Off Switches the instrument off if held down for
one second. Switches the back-lighting on
and off.
8 Sens Changes the sensitivity steps of the frequen-
cy and level settings.
9 Level Setting the output level. You can set up the
output signal in the following units:
dBV, dBu,V. With the MR-PRO, dBF (dB re-
ferred to Full Scale) and % units are available
when playing back Wave files.
Overview
1 ESC Terminates an entry, jumps to the
top menu level or closes an open window.
2 Rotary
wheel
Slow turning: Precise setting of the value.
Rapid turning: Setting the value in larger
steps.
3 Enter Confirming a selection.