MTS Series 505G2 SilentFlo Hydraulic Power Unit Model 505G2-11 User Manual
Page 33
HPU Setup
Model 505G2.07/.11 SilentFlo™ HPU
33
Mean Temp/numeric display and
Deadband/numeric display
Part of the Analog Option;only displayed
if the Analog Option was purchased.
Mean Temp (deg) - blue-green: Indicator used as a label for the
pushbutton switch below it.
Deadband (deg) - blue-green: Indicator used as a label for the
pushbutton switch below it.
Mean Level numeric display - pushbutton/indicator - gray: Used
to set the mean level operating temperature of the hydraulic fluid.
Push the button to display a numeric keypad. With the keypad
displayed, use the number keys to set the desired mean level then
press Enter to set the value and return to the status screen. Once
value has been set on the keypad, that value is displayed.
Deadband numeric display - pushbutton/indicator - gray: Used to
set the allowable deviation from the mean level operating
temperature of the hydraulic fluid. Push the button to display the
numeric keypad. With the keypad displayed, use the number keys
to set the desired deadband level then press Enter to set the value
and return to the status screen. Once value has been set on the
keypad, that value is displayed.
Pressure Filter Not Present/Pressure
Filter Present
Pushbutton /Indicator. This button is used to define if a pressure
filter is present.
Pressure Filter Not Present- gray: The HPU does not have a
pressure filter.
Pressure Filter Present- black: The HPU does have a pressure
filter.
Temp Display In (deg)
Part of the Analog Option;only displayed
if the Analog Option was purchased.
Pushbutton/Indicator: Used to select temperature display in either
Celsius or Fahrenheit. Push to alternate between the two
temperature scales.
Temp Display in
°
F - gray.
Temp Display in
°
C - black.
Pressure Display In (units)
Part of the Analog Option;only displayed
if the Analog Option was purchased.
Pushbutton/Indicator: Used to select the units for pressure displays
in either psi or MPa. Push to alternate between the two pressure
units.
Pressure Display in psi - gray.
Pressure Display in MPa - black.
Screen select buttons
The Main, Status, and Setup pushbuttons/indicators are described
in the Main Screen section; refer to
The HMI Setup pushbutton/indicator is for MTS service personnel
and used to display a screen that is used to define factory settings
such as serial number and HMI software version.
Name and Location
Description