MTS 709 Alignment System - Manual (Page 93)

709 Alignment System Align 93
Align
The Align tab provides a variety of displays to indicate the alignment process.
On the left side, numerical values are displayed for the gages and bending offsets.
In the center, a bar graph shows the load values. Depending on the check box
selections in the Options tab, one or two bars will be displayed. The Strain bar is
the load calculated from stain based on the setting on the Specimen tab. The
Signal bar is the scaled Load Analog Input Signal based on the gain on the
Options tab.
On the right, points representing the bending strain are plotted on a x-y graphical
coordinate system. The color coding of these points on the graph on the right
directly relates to the color coding of the specimen gauge values on the left.