Kuryakyn 1095 BAHN SHIFT LEVER - Manual (Page 3)

T
I
P
S
F
O
R
P
R
O
P
E
R
C
A
R
E
:
NOTE:
Prepare the included 5/16”-24 X 2.5” Socket Head Cap Screws according to
the thread locker manufacturer’s recommendations.
STEP 6 Insert the included 5/16”-24 X 2.5” Socket Head Cap Screws through the BAHN Pegs. Apply blue
Loctite (242 Medium Strength) to the exposed screw threads. Thread the screws into the Shift
Levers; tighten the screws.
STEP 7
Ensure that the bike is in neutral BEFORE starting the bike. Ensure proper function of the shifting
mechanism BEFORE operating the bike.
BAHN SHIFT LEVER INSTALLATION
Ride On!
It is the end user’s responsibility to ensure that all of the fasteners
(including pre-assembled) are tightened before operation of the motorcy-
cle. Küryakyn will not provide warranty coverage on products or compo-
nents lost due to improper installation or lack of maintenance. Periodic in-
spection and maintenance are required on all fasteners.
PAGE
3
PIC 4
INSERT THE INCLUDED 5/16” SCREW IN THE PEG,
APPLY LOCTITE TO THE THREADS OF THE SCREW,
THEN ATTACH THE PEG TO THE SHIFT LEVER