COATS ProGuard Leverless Plus Tire Changer - Manual (Page 8)

Operation Manual - COATS PRO GUARD PLUS - 8
3.0_SAFETY DEVICES
The tire changer is equipped with safety devices that are designed to guarantee the safety of the machine operator:
- Pneumatic safety valve, arranged inside the machine that prevents the pressure from exceeding 58 PSI (4 bar) during
infl ation.
- Pressure regulator and gauge that limits the maximum pressure of the circuit to 145 PSI (10 bar).
- Maximum tank pressure valve, fi tted on the tank, to prevent the maximum pneumatic pressure from exceeding 160
PSI (11 bar) (optional auxiliary bead seater)
- Removal or tampering with the safety devices provides grounds to immediately cancel the warranty and
represents a breach of State and Federal OSHA regulations and codes.
4.0_SAFETY NOTICES AND DECALS
WARNING
Failure to follow danger, warning, and caution instructions may lead to serious personal injury or death to operator orb-
ystander or damage to property. Do not operate this machine until you read and understand all the dangers, warnings
and cautions in this manual. For additional copies of either, or further information, contact:
Hennessy Industries, Inc.
1601 J.P. Hennessy Drive
LaVergne, TN 37086-3565
(615) 641-7533 or (800) 688-6359
www.ammcoats.com
For additional information contact:
Rubber Manufacturers Association
1400 K Street N. W.
Washington, DC 20005
(202) 682-4800
Tire Guides, Inc.
The Tire Information Center
1101-6 South Rogers Circle
Boca Raton, FL 33487-2795
(561) 997-9229
www.tireguides.com