Echo MS-53BPE - Manual (Page 5)

The backpack strap is provided with multiple features including shoulder strap and waist strap
(figure 1). The top of the shoulder strap is attached to the top of the tank and is removable.
The strap attaches to the base of the sprayer by sliding the buttons into the slots until they snap
into place (Figure 2).
INSTALLING THE SHOULDER STRAP
FILLING THE SPRAYER
Make sure the filter basket is in place to keep debris from entering the tank.
Determine the amount of mixture needed for your application. Add the proper amount of water to
the tank. Add the proper amount of chemical to the tank (check the chemical label for proper ratio of
chemical). Stir mixture in tank with a clean utensil (like a paint stirrer). The tank will hold the 5-gallon
(20L) capacity plus the chemical.
It is not necessary to completely fill the sprayer tank with each use. You can fill the tank with only the
amount needed for each application.
Always follow the manufacturer’s instructions included on their product label.
SPRAYER COMPONENTS & USE INFORMATION, Continued
The pump handle stores
vertically and sets into the
pump handle clip (Figure 1).
The wand is stored in the wand
clip (Figure 2).
WAND/PUMP HANDLE
Figure 2 Figure 1
Figure 2 Figure 1
Strap Assembly
Link
Arm
Pump
Handle Clip
Pump
Handle
Wand
Wand Clip
Pump
Handle
Shoulder
Strap
Waist
Strap
4E
Tank Base
Strap Button