JLG 723A Operator Manual - Manual (Page 146)

Section 7 - Lubrication and Maintenance
7-12 31200567
Engine Oil
A. Engine Oil Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open engine cover.
3. Locate dipstick (1) behind fuel filter (2).
4. Remove dipstick and check oil mark. The oil should be between the full (3) and
add (4) marks within the crosshatched area of the dipstick.
5. If oil is low, remove oil fill cap (5) and add motor oil to bring oil up to the full mark
in the crosshatch area.
6. Replace oil fill cap and dipstick.
7. Close and secure engine cover.
10
OW0970
OW1020
OAH1950
4
3
ADD
5
1
2