Eppendorf Mastercycler pro - Manual (Page 10)

Product description
Mastercycler pro
English (EN)
10
Abb. 2-2: Terminal block
Fig. 2-2: Terminal block
Abb. 2-3: Control panel
Fig. 2-3: Control panel
Only devices meeting the IEC 950/EN 60950 (UL 1950) standards may be connected to the interfaces of the
Mastercycler pro and the control panel.
1 Parallel interface
Connection for printer.
2 Serial interface (RS 232)
Connection for Eppendorf temperature validation
system.
3 Control panel connection
4 CAN out
Data outlet for connecting several
Mastercycler pro or Mastercycler ep.
5 CAN in
Data inlet for connecting several
Mastercycler pro or Mastercycler ep.
6 Term switch
Termination of CAN bus when networking several
Mastercycler pro or Mastercycler ep.
Lower position: ON. Upper position: OFF.
7 Address dial
Setting of device address when networking
several Mastercycler pro or Mastercycler ep.
1 Display
2 USB port 1
For mouse, printer or storage medium.
3 USB port 2
For mouse, printer or storage medium.
4 MMC slot
For data exchange via a MultiMediaCard (MMC).
Printer RS 232 Control Panel CAN_out CAN_in Term Address
1 2 3 4 5 6 7
1
2
3
4