Philips SA4RGA04KF-37 - Manual (Page 21)

19 EN
10 Technical data
Power
• Power supply: 220 mAh Li-ion polymer
internal rechargeable battery
• Play time¹
Audio (.mp3): up to 22 hours
Radio: up to 8 hours
Software
• Philips Device Manager: : To update
the firmware and recover the player
• Songbird: To transfer³ media
Connectivity
• Headphone 3.5 mm
• USB 2.0 High speed
Sound
• Channel separation: 45 dB
• Frequency Response: 20-18,000 Hz
• Output power: 2 x 2.4 mW
• Signal to noise ratio: > 84 dB
Audio playback
Supported formats:
• MP3
Bitrate: 8-320 kbps and VBR
Sampling rates: 8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
• WMA (unprotected)
Bitrate: 10-320 kbps CBR, 32-192 kbps
VBR
Sampling rates: 8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
• WAV
Storage media
Built-in memory capacity²:
• SA4RGA02 2 GB NAND Flash
• SA4RGA04 4 GB NAND Flash
• SA4RGA08 8 GB NAND Flash
Media transfer³
• Songbird (sync)
• Windows Explorer (drag and drop)
Display
• Color LCD 128 x 64 pixels
Note
• Specifications are subject to change without notice.
• ¹ Rechargeable batteries have a limited number of
charge cycles. Battery life and number of charge cycles
vary by use and settings.
• ² 1 GB = 1 billion bytes; available storage capacity is
less. Full memory capacity may not be available as some
memory is reserved for the player. Storage capacity
is based on 4 minutes per song and 128-kbps MP3
encoding.
• ³ Transfer speed depends on operating system and
software configuration.
PC requirements
• Windows® XP (SP3 or above) / Vista /
7/ 8
• Pentium III 800 MHz processor or higher
• 512 MB RAM
• 500 MB hard disk space
• Internet connection
• Windows® Internet Explorer 6.0 or later
• USB port