Philips CAM102SB-00 - Manual (Page 9)

9
Tip
•
To save energy, the camcorder turns off automatically
after being idle for 3 minutes.
First-time setup
When you turn on the camcorder for the first
time, a menu for OSD language selection is
displayed.
1
Press +/- to select a language.
2
Press to confirm.
» A welcome message is displayed briefly.
» An inquiry box for date and time
setting is displayed.
3
Press to highlight [Yes].
» A date setting menu is displayed.
4
Press / to select the day, month and
year fields successively.
5
Press +/- to change the value of each field.
6
Press to confirm the date setting.
» A time setting menu is displayed.
7
Press / to select the hour and minute
fields successively.
8
Press +/- to change the value of each field.
9
Press to confirm the time setting.
» The first-time setup is complete.
» The camcorder enters viewfinder
mode.
Tip
• See ‘Use your camcorder - Adjust settings’ for more
settings.
3 Get started
Load the Micro SD card
1
Flap open the protective cover on the
Micro SD card socket.
2
Insert a Micro SD card (not supplied) into
the socket.
• Ensure that the the Micro SD card is
not write-protected.
• Ensure that the metal contact of the
card faces down.
3
Close the protective cover securely.
Turn on
• Press .
» For first-time users, a menu for date
and time setting appears (See ‘’Get
started - Set the date and time).
» The camcorder switches to viewfinder
mode.
To turn off the camcorder:
• Press and hold .
» The backlight on the display panel
turns off.
EN