Workstation configuration, Other sources of information, Workstation configuration: -9 – Brother NC6100H User Manual
Page 50: Other sources of information -9
NETBIOS PEER TO PEER PRINTING 4 - 9
Workstation Configuration:
On each workstation that you wish to print from, execute the
following step:
Go to the DOS or OS/2 command prompt and enter the command:
NET USE LPTx: \\NodeName\ServiceName
Where
x
is the LPT port number (1 through 9),
NodeName
is the
NetBIOS Name of the print server (usually
BRN_xxxxxx
by default,
where
xxxxxx
is the last six digits of Ethernet address) and
ServiceName
is the service name of the print server (BINARY_P1
by default).
For example:
NET USE LPT2: \\BRN_310107\BINARY_P1
Other Sources of Information
1
for more information on
network printing.
2
Refer chapter 10 of this User’s Guide to learn how to configure
the IP address of the printer.
You can find the NetBIOS name and MAC address by
printing out the printer settings page. Refer to the Quick
Setup Guide for information on how to print the settings page
on your print server.