BT STUDIO 1500 - Manual (Page 43)

BT Studio 1500 – Edition 3 – 27.07.04 – 5876
43 Using the answering machine
When the answering machine
memory is full the message light
on the base will flash steadily every
half a second.
Repeat this step to set and confirm the second and
third digits.
4. Press to confirm. Your machine announces “Your
security code is…”.
Record a memo
You can record a message at the base which can be
listened to and deleted just like any received message.
1. Press and hold until you hear “Please speak after
the tone.”
2. Release to end recording.
Memory full
When the recording memory has been used up or a
maximum of 59 messages have been received, no more
messages can be taken. The machine will switch to
Answer Only mode and play the message “Hello your call
cannot be taken at the moment and you cannot leave a
message, so please call later.”
You must delete existing messages before new ones can
be taken.
Skip
Skip
Del