Nokia 638 - Manual (Page 21)

➃
d) If both the phone number and name you
entered are already in the phone’s memory,
the message
ALREADY STORED is briefly
displayed and then the phone suggests the
first empty memory location if available (e.g.,
MOVE TO 5? ), or prompts you to enter a
memory location number if there is no empty
memory location (
MOVE TO? ). Press , or first
enter the memory location number and then
press
. If the location you entered is already
in use, the phone prompts you to overwrite the
contents of the location (
REPLACE
CONTENT? ). If you want to replace the
information, press .
The message MOVED will be displayed confirming
that the information has been moved to the mem-
ory location displayed in the upper right corner of
the display.
•
When the STORE , REPLACE or MOVE prompt is
displayed and you do not want to continue, either
press
or wait until the message NOT STORED
(at the store and replace prompts) or NOT MOVED
(at the move prompt) appears. The phone exits the
store function, and the information you tried to store
will then reappear on the display, and you can store
it in the memory as described above, or you can
clear the display by pressing and holding
.
To use the quick save method:
➀
Enter the area code and phone number and
name.
➁
Press and hold until STORED appears.
The message STORED confirms that the informa-
tion is stored in the first empty memory location
displayed in the upper right corner of the display.
•
If there is no empty location the message NO
SPACE is displayed and the information you tried
to store will reappear on the display, and you can
store it as described below, or you can clear the
display by pressing and holding
.
NHA-4NG Nokia 638_AU
Authentication version
US English 9351137
Issue 3
Version: 0.7, Date: 11 (2) Dec.
1996
Status: ToL, JaK, JaG, SIR, JoF
20