Registering a connected cellular phone, Voice recognition, Connecting a bluetooth audio player – Pioneer AVH-P4200DVD User Manual
Page 43: Connecting to a bluetooth device, Automatically, Connecting to a bluetooth device automatically, Detailed instructions
You may need to refer to the operation manual
that came with your phone if you are unsure
how to initiate a connection from your phone.
1
Put the unit in initiating a connection
mode.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
2
Use a cellular phone to connect to this
unit.
# Operation varies depending on the type of cel-
lular phone.
# You may need to enter the link code on your
cellular phone to complete the connection.
Registering a connected
cellular phone
(Function of AVH-P4200DVD)
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with Blue-
tooth wireless technology. Only one cellular
phone can be registered.
1
Start registering a connected cellular
phone.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
2
Use cellular phone to register to this
unit.
If registration is successful, the device name
of the connected phone is displayed in the se-
lected assignment.
# If the assignment is already taken, the device
name will be displayed. To replace an assignment
with a new phone, first delete the current assign-
ment.
# If registration failed, the device name of the
connected phone will not be displayed in the se-
lected assignment. In such cases, return to step
1 and try again.
Voice recognition
(Function of AVH-P4200DVD)
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
1
Start voice recognition.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
2
Say the name of your contact aloud.
Connecting a Bluetooth
audio player
(Function of AVH-P4200DVD)
A Bluetooth wireless connection can be estab-
lished by putting the unit into initiating a con-
nection mode.
% Put the unit in initiating a connection
mode.
Refer to Bluetooth audio operations on page
26.
This unit is now on standby for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Connecting to a Bluetooth
device automatically
(Function of AVH-P4200DVD)
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
En
43
Section
12
Detailed
instructions
Detailed instructions